MHSC LCUF36C-R Instructions d'exploitation télécharger pdf (Page 14)

LCUF Vent Free Firebox

26D4721



1. Push insulation back approximately 2" from the end of

each duct.

2. Slip each duct over duct connector until an equal length

of connector extends into each duct.

3. Place duct clamp over the end of each duct. Tighten

duct clamp down snuggly.

4. Push insulation back into place and over duct clamp.



7. If the duct is the insulated type, push the insulation back

from one end of the duct approximately 2". Figure 19

8. Slip the exposed end of the duct over the starting collar

on the fireplace.

9. Using the sheet metal screws provided, secure the duct

end to the collar attached to the fireplace.

10.Nail or screw the combustion air assembly to the surface

of the wall.









FP1907

Duct connector

8/08

Approximately

2”

Figure 19 -

Install Duct Connector 403

Insulation

Duct

Connector

Duct Clamp

Duct

FP1907

1 2 ... 9 10 11 12 13 14 15 16

Pas de commentaire

MHSC LCUF36C-R Instructions d'exploitation Page 14